Centsys Nova Helix, Руководство по эксплуатации

Страница: 31 / 36

page 31 www.centsys.com
9.2. Example Autolearn Configuration Procedure
Ch.1 Ch.2
An
y But.
Ch.3 Ch.4
Closed
Ch.5 Ch.6 Ch.7 Ch.8
Closed
Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15
Closed
The system enters A
utolearn
Mode
with
Ch.2 selected. Note that Ch.4, 8 and 15 are all closed because there are buttons that are already learnt into those channel compartments.
Once jumper J2 is re
mo
ved,
the
sys
-
tem exits A
utolearn
configur
ation
mode, and enters A
utolearn Mode
proper
. The associa
-
tion table is r
ation
-
alised
to
reflect
only
the buttons that will be accepted during A
utolearn, and the
channels they will be associated with (activ
ate) when
they are pressed.
This
A
urolearn
configur
ation
timeline
illustr
ates
a
typical
example
of
an
A
utolearn
configur
ation
procedure.
Before
entry
into
A
utolearn,
buttons
(one
or
sev
er
al)
are
learnt
into
channels
4,
8
and
15.
A
utolearn
Mode
is
entered
on
Channel
2
in
the
example.
Once
in
A
utolearn
configur
ation,
the
steps
follow
sequentially
from
left
to
right
(as
per
the
timeline
at
the
top
of
the
page).
When
Jumper
J2
is
remo
ved
(in
the
last
step
on
the
right),
the
receiv
er
enters
A
utolearn
Mode
for
a
period
of
7-da
ys.
Only
buttons
that
are
configured
in
the
configur
ation
section
will
be
accepted
once
in A
utolearn.
Ch.1 Ch.2 Ch.3 Ch.4
Closed
Ch.5 Ch.6
An
y But.
Ch.7 Ch.8
Closed
Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15
Closed
Since no buttons are pressed, the An
y Button propert
y
is remo
ved from
Ch.2 and shifted to Ch.6, when the Ch.6 jumper setting is
configured
on
the
Channel Jumpers.
Ch.1 Ch.2 Ch.3 Ch.4
Closed
Ch.5 Ch.6
But. 3
Ch.7 Ch.8
Closed
Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15
Closed
As soon as an
y
button is pressed, the An
y Button
propert
y is remo
ved
and nev
er restored
during the current A
utolearn session.
The system will accept the last button pressed (and the tr
ailing edge
tr
ansaction of that
button press).
Ch.1 Ch.2 Ch.3 Ch.4
Closed
Ch.5 Ch.6
But. 3
Ch.7 Ch.8
Closed
Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15
Closed
Ch.1
But. 1&2
Ch.2 Ch.3 Ch.4
Closed
Ch.5 Ch.6
But. 3
Ch.7 Ch.8
Closed
Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15
Closed
If a channel that is already closed is selected during the A
utolearn session,
all oper
ations are
simply discarded. Once a channel is closed it can nev
er
be selected for an
y
sort of A
utolearn
activit
y.
Ch.1
But. 1&2
Ch.2 Ch.3 Ch.4
Closed
Ch.5 Ch.6
But. 3
Ch.7 Ch.8
Closed
Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15
Closed
It is possible to select multiple buttons for learning during the A
utolearn process.
The button com
-
bination is alw
ays
accepted in the association table on the tr
ailing edge of
the button tr
ansac
-
tion.
Ch.1
But. 1&2
Ch.6
But. 3
Enter Autolearn
with Ch. 2 Jumper
Fitted
Time
Association T
able
B1&2
B1
B2
B3
Change to
Ch. 6
Button 3
associated with
Ch. 6
Change to Ch. 8
No button accepted
because channel is closed
Change to Ch. 1
Button 1&2 associated
with Ch. 1
Jumper J1 Removed
Channel Association Table
finalised
S
ECTION
9
APPENDICES