Centrometal CentroPelet ZVB 16 Скачать руководство пользователя страница 2

GB

Dear Customer,

We thank you for having chosen one of our products, the fruit of technological experience and of continual research for 
a superior quality product in terms of safety, dependability, and service.
In this manual you will find all the information and useful suggestions to use your product with the maximum safety 
and efficiency.

• Incorrect installation, incorrectly performed maintenance, improper use of the product release the manufacturer from

every eventual damage derived from the use of the 

boiler.

• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• This manual has been realized by the manufacturer and constitutes an integral part of the product and must remain

with it during its entire lifetime. If the product is sold or transferred, be sure that the booklet is present since the
information contained in it are addressed to the buyer, and to all those persons of various titles who complete the
installation, use and maintenance.

• Carefully read the instructions and the technical information contained in this manual, before proceeding with the

installation, use, and any operation on the product.

• The observance of the indications contained in the present manual guarantees the safety of people and the product,

the economy of use and a longer functioning lifetime.

• Although the carefully studied design and the risk analysis done by our company has permitted the realization of a

safe product, in any case, before effecting any operation on the 

boiler

, it is recommended to keep said manual

avail-able and pay scrupulous attention to the instructions written therein.

• Be very careful when moving the ceramic details where present.
• Check the precise flatness of the pavement where the product will be installed
• The wall where the product will be placed must not be constructed in wood, or in any case, made of an inflammable

material, and in addition it is necessary to maintain a safety distance.

• While the

 boiler

 is in operation, several parts (door, handle, sides) can reach high temperatures. Therefore

pay attention and use the proper precautions, above all in the presence of children, elderly or disabled persons, and
animals.

• Assembly must be performed by authorized persons .
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the intent of pursuing a

policy of constant development and renewal of the product can, without any notice, make any modifications that are
believed opportune.

• When the 

boiler

 is working at its maximum speed, it is strongly suggested to wear gloves while handling with the

door for pellets loading and the door handle.

• It is prohibited to install in bedrooms or in explosive environments.
• Only use replacement parts recommended by the supplier.

In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if 
necessary. After that contact the Authorized 

Person

.

Never cover the body of the 

boiler

 in any way or obstruct the openings placed on the upper 

side when the device is operating. All our 

boilers 

are trial lighted on the construction line.

This instruction booklet is an integral part of the product: 

make sure that it always accompanies the appliance

even 

in case of transfer to another owner or in the case of transfer to another place

In the event of damage or loss, request 

a copy from the area technician.

These symbols indicate specific messages in this booklet:

ATTENTION: 
This warning sign indicates that the message to which it refers should be carefully read and 
understood, 

because failure to comply with what these notices say can cause serious damage to 

the 

boiler 

and put the user’s safety at risk.  

Please remember that the first power must be carried out by Authorized 

person

, which 

verifies the installation and completes the warranty.
Any kind of tampering or unauthorized substitution with non-original spare parts can be 
dangerous to the safety of the operator and relieves the manufacturer from any civil or 
criminal liability.

INFORMATION: 
This symbol is used to highlight information which is important for proper 

boiler 

operation. Failure 

to comply with these provision will compromise use of the 

boiler

 and its operation will not be 

satisfactory. 

Содержание CentroPelet ZVB 16





























Отзывы: