COMMON CABLES:
The photo below shows the DP-4 connected to the primary cable assemblies common to all new
Centroid control installations. Note the bulkhead connector to provide physical support for the coil
cord. No additional adapters are needed for new Centroid (TM) systems. See the appropriate appendix
in this manual for additional required adapters, connection diagrams and parameter settings for your
installation.
11
Probe Cable P/N:11085
Internal wiring harness with fuse
holder and bulkhead connector to
mate with COIL CORD.
COIL CORD
P/N: 10394
DP-4 Probe shown connected to retractile coil cord and internal
wiring harness with bulkhead connector and fuse holder.
