background image

1

DANGER

1. If you smell Gas:

a. Shut off  gas to the appliance
b. Extinguish any open fl ame
c. Open lid
d. If odor continues, keep away from    
     the appliance and immediately 
     call your gas supplier or your 
     fi re department

2. Do not store or use gasoline or other 

fl ammable vapours and liquids in the 
vicinity of this or any other appliance.

3. An LP cylinder not connected for use shall 

not be stored in the vicinity of this or any 
other appliance.

4. Requires two people to complete the 

assembly process.

5.  Beware of sharp edges.

WARNING

Failure to follow all of the Manufacturer’s 
instructions could result in hazardous fi res, 
explosions, property damage, or serious 
personal injury or even death.

Follow all leak check procedures carefully 
prior to operation of barbecue, even if grill 
was dealer assembled. Do not try to light 
this barbecue without reading the Lighting 
Instructions section of this manual.

THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES

To ORDER non-warranty replacement parts or accessories, or to register your warranty, 

please visit us on the web at 

www.centrobbqs.com.

CAUTION

Read and follow all safety statements,  
assembly instructions, and use and care 
directions before attempting to assemble 
and cook.

CAUTION

Sharp edges. Wear gloves when assembling 
your grill.

T H I S   B A R B E C U E   I S   F O R   O U T D O O R   U S E   O N L Y

CO N TAC T   C A L L   C E N T R E   I F   A NY   PA R T S   A R E   M I S S I N G

INSTALLER OR ASSEMBLER/CONSUMER

This manual should be kept with the BBQ at 
all times.

H E A V Y   A R T I C L E   N E E D S   2   T O   L I F T

Caution:

 

Sheet metal can cause injury. Wear gloves when installing the grill. 

HARDWARE PACK

¼” - 20UNCX13 Screw 

X 8

ø7 Lock Washer

X 20

ST4.2x10 Tapping Screw

X 4

¼” - 20UNCX38 Screw

X 4

ø7 Washer 

X 20

ø5 Lock Washer

X 24

¼” - 20UNCX16 Screw

X 8

NO. 10-24UNC10 Screw

X 24

ø5 Washer

X 24

Wrench

X 1

NO. 8-32UNCx10 Screw

X 4

1

2

3

4

5

6

7

8

9

10

11

12

13

Wing Nut 

X 1

Knob

X 1

TOOLS NEEDED FOR ASSEMBLY

• #2 Phillips screwdriver (Long and short)

• ¼” Slotted screwdriver (Long and short)

• Adjustable wrench

• Pliers

• Rubber Mallot

Before assembling the barbecue, read these 
instructions carefully.

Assemble the barbecue on a fl at, clean surface. 
Grill is heavy. 

Notes: Do not fully tighten all the nuts during 
this initial stage.

No.

Description

Part Number

Quantity

1

¼"-20UNCX13 Screw

20120-13013-250

8

2

¼"-20UNCX38 Screw

20120-13038-250

4

3

¼"-20UNCX16 Screw

20120-13016-250

8

4

ø7 Lock Washer

41400-07000-250

20

5

ø7 Washer

40300-07000-250

20

6

NO.10-24UNCx10 Screw

20124-10010-250

24

7

ø 5 Lock Washer

41400-05000-250

24

8

ø 5 Washer

40300-05000-250

24

9

ST4.2x10 Tapping Screw

22500-42010-137

4

10

Wrench

G413-0032-9082

1

11

NO.8-32UNCx10 Screw

20332-08010-250

4

12

Control Knob 

G412-4500-9000

1

13

Wing Nut

33301-04000-032

1

1 - 8 7 7 - 7 0 7 - 5 4 6 3

Содержание 3900S











Отзывы: