SKU 98635
For technical questions, please call 1-800-444-3353.
Page 9
position to prevent accidental opera-
tion.
note:
Residual air pressure should not be
present after the tool is disconnected
from the air supply. However, it is a
good safety measure to attempt to
discharge the tool in a safe fashion
after disconnecting to ensure that the
tool is disconnected and unpowered.
OPERAtInG InStRuCtIOnS
Read the EntIRE IMPORtAnt
SAFEtY InFORMAtIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tO PREVEnt
SERIOuS InjuRY
FROM ACCIdEntAL
OPERAtIOn:
turn the Power Switch (60) of
the Compressor to its “OFF”
position and unplug the tool
from its electrical outlet
before performing any
inspection, maintenance, or
cleaning procedures.
Work Piece and Work Area Set up
Designate a work area that is clean
1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Route the Power Cord (67) and air
2.
hose along a safe route to reach the
work area without creating a tripping
hazard or exposing the Power Cord
or air hose to possible damage. The
Power Cord and air hose must reach
the work area with enough extra
length to allow free movement while
working.
There must not be hazardous ob-
3.
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
The Air Compressor should be po-
4.
sitioned on a flat, hard surface and
preferably in a dry location.
General Operating Instructions
Check to make sure the Compres-
1.
sor’s Drain Valve (53), located at the
bottom of the Tank (1) is fully closed.
(See Figure C, next page.)
FIGuRE C
dRAIn VALVE
(53)
2. Turn the Air Outlet Valve on the Reg-
ulator Assembly (62) to its “CLOSED”
position.
(See Figure d.)
