Page 7
SKU 98189
For technical questions, please call 1-800-444-3353.
FunctionAl description
Specifications
Maximum Air Pressure 90 PSI
Air Inlet
1/4” -18 NPT
Maximum Speed*
12,000 RPM
Air Consumption
4 CFM @ 90 PSI
Activation Type
Squeeze Valve Lever
Sand Paper Type
Hook and Loop Backing
Sand Paper Size
2-7/16” L X 3/4” W
* Maximum speed at stated maximum air pressure. Ex-
cess air pressure is hazardous and may cause the tool
to exceed stated maximum speed.
components and controls
Figure 1
Air Valve Lever (28)
1.
The Air Valve Lever (28) is used to
turn the Air Reciprocating Sander
ON and OFF by depressing (ON) or
releasing (OFF).
(see Figure 1)
Figure 2
Air Regulator Assembly (30)
Air Regulator Knob (36)
2. The Air Regulator Assembly (30)
regulates amount of air input to the
Sander. Turn the Air Regulator Knob
(36) to adjust the oscillation speed.
The closer the Air Regulator Knob
(36) reads to “MAX”, the faster the
sandpaper will oscillate.
(see Figure
2)
initiAl tool set up/
AsseMBlY
read the entire iMportAnt
sAFetY inForMAtion
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
