Page 3
SKU 98189
For technical questions, please call 1-800-444-3353.
Work area
Keep the work area clean and well
a.
lighted.
Cluttered benches and dark
areas increase the risks of injury to
persons.
do not operate the Air recipro-
b.
cating sander in explosive atmo-
spheres, such as in the presence
of flammable liquids, gases, or
dust.
The tool is able to create fric-
tion and/or sparks possibly resulting
in the ignition of the dust or fumes.
Keep bystanders, children, and
c.
visitors away while operating the
Air Reciprocating Sander.
Distrac-
tions are able to result in the loss of
control of the tool.
personal safety
Stay alert. Watch what you are do-
a.
ing and use common sense when
operating this tool. Do not use
while tired or under the influence
of drugs, alcohol, or medication.
A
moment of inattention while operating
the increases the risk of injury.
dress properly. do not wear loose
b.
clothing or jewelry. contain long
hair. Keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
increases the risk of injury as a result
of being caught in moving parts.
Avoid unintentional starting. Be
c.
sure the Air Valve lever (28) is off
before connecting to the air sup-
ply.
Do not carry the tool with your
finger on the Air Valve Lever (28) or
connect the tool to the air supply with
the Air Valve Lever (28) depressed/
on.
remove adjusting keys and
d.
wrenches before turning the tool
on.
A wrench or a key that is left at-
tached to a rotating part of the tool
increases the risk of personal injury.
do not overreach. Keep proper
e.
footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpect-
ed situations.
f.
use safety equipment.
A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear heavy-duty work
gloves during use.
g.
Always wear eye protec-
tion.
Wear ANSI-ap-
proved safety goggles.
h.
Always wear hearing
protection when using
the tool.
Prolonged expo-
sure to high intensity noise
is able to cause hearing loss.
tool use and care
Use clamps or another practical
a.
way to secure and support the
workpiece to a stable platform.
Holding the work by hand or against
the body is unstable and is able to
lead to loss of control.
do not force the Air reciprocating
b.
sander.
Use the correct tool for the
application. The correct tool will do
the job better and safer at the rate for
which the tool is designed.
do not use the tool if the Valve
c.
lever (28) does not turn the tool
on or off.
Any tool that cannot be
