Page 10
SKU 97956
For technical questions, please call 1-800-444-3353.
uSER-MAINTENANcE
INSTRucTIONS
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO pREVENT
SERIOuS INjuRY
FROM AccIDENTAL
OpERATION:
Turn off the tool, detach the
air supply, safely discharge
any residual air pressure in
the tool, and release the
Trigger (19) before performing
any inspection, maintenance,
or cleaning procedures.
TO pREVENT SERIOuS
INjuRY FROM TOOL
FAILuRE:
Do not use damaged
equipment. If abnormal
noise, vibration, or leaking
air occurs, have the problem
corrected before further use.
TO pREVENT ExpLOSION:
Lubricate the tool only
with specified lubricants.
Lubricate the air inlet
using only pneumatic tool
oil. Lubricate the internal
mechanism using only
white lithium grease. Other
lubricants may damage the
mechanism and may be
highly flammable, causing an
explosion.
cleaning, Maintenance, and
Lubrication
Note:
These procedures are in addition to
the regular checks and maintenance
explained as part of the regular
operation of the air-operated tool.
cleaning:
1.
Wipe exterior of the tool
with a dry cloth. Do not use solvents.
Do not immerse the tool in liquid.
Daily - Air Supply Maintenance:
2.
Every day, perform maintenance
on the air supply according to
the component manufacturers’
instructions. The lubricator’s oil
level needs to be maintained and
the moisture filter must be regularly
drained. Performing routine
maintenance on the air supply will
allow the tool to operate more safely
and will also reduce wear on the tool.
Before each use:
3.
If an automatic
oiler is not used, add a few drops
of Pneumatic Tool Oil to the airline
connection before use. Add a
few drops more after each hour of
continual use.
