Page 4
For technical questions, please call 1-888-866-5797.
Item 93755
SA
FE
TY
OP
ERA
TI
O
N
MAINT
ENANC
E
SE
TUP
Specific Safety Instructions
1.
This Drum Extractor is designed for use only
with nonflammable, noncorrosive liquids. This
tool is also not designed for fuel transfer.
2.
Do not use the Drum Extractor on damaged
or rusted barrels.
Barrel must have a
sealed lid. This unit pressurizes the barrel to
extract liquid and will only function properly
and safely on closed, sealed barrels.
3.
Stay within air pressure capacity.
Never
operate the Drum Extractor above 10 PSI.
4. Only use with accessories rated to handle the
forces exerted by this tool during operation.
Other accessories not designed for the forces
generated may break and forcefully launch pieces.
5. Attach all accessories properly to the tool before
connecting the air supply. A loose accessory
may detach or break during operation.
6. Obey the manual for the air compressor
used to power this tool.
7. Install an in-line shutoff valve to allow
immediate control over the air supply in an
emergency, even if a hose is ruptured.
8.
Disconnect air hose and release any
built-up air pressure.
Never service the
Drum Extractor or disassemble with the air
hose attached. Always release any built-up
air even after disconnecting hose. Disconnect
the Drum Extractor when not in use.
9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. The warnings and precautions discussed in this
manual cannot cover all possible conditions and
situations that may occur. It must be understood
by the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
