TESTING THE SINGLE SEQUENTIAL SAFETY TRIP MECHANISM
WARNING: Even though the Nailer should be empty during this
procedure, ALWAYS point the Nailer at a piece of scrap wood when testing.
1.
Make sure the tool is disconnected from its air supply.
2.
Completely empty the Magazine Assembly (82) of Brads.
3.
Make sure the Trigger (42) and Driver Guide (54) move freely, without sticking.
4.
The Nailer should not fire if the Driver Guide (54) is not depressed against the
workpiece.
SKU 93680 For technical questions, please call 1-800-444-3353 PAGE 6
OPERATION
For best service, you should incorporate a regulator and in-line filter as shown in
the diagram below. Hoses, couplers, regulators, and filters are all available at
Harbor Freight Tools.
FILTER
REGULATOR
QUICK
COUPLER
QUICK
CONNECTOR
QUICK
COUPLER
QUICK
CONNECTOR
DRIVER GUIDE (54)
TRIGGER
(42)
MAGAZINE ASSY. (82)
QUICK CONNECTOR (48)
