background image

Page 3

For technical questions, please call 1-888-866-5797.

Item 61615 
        

IMPORTANT SAFETY INFORMATION

General Safety Warnings

  WARNING Read all safety warnings and instructions.   

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.   

Save all warnings and instructions for future reference.

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible 
conditions and situations that may occur.  It must be understood by the operator that common sense 
and caution are factors which cannot be built into this product, but must be supplied by the operator.

1. 

Work area safety

a. 

Keep work area clean and well lit.

  

Cluttered or dark areas invite accidents.

b. 

Do not operate the Compressor in explosive 
atmospheres, such as in the presence 
of flammable liquids, gases or dust.

  

Compressor motors produce sparks 
which may ignite the dust or fumes.

c. 

Keep children and bystanders away 
from an operating compressor.

2. 

Electrical safety

a. 

Compressor plugs must match the outlet.  
Never modify the plug in any way.  
Do not use any adapter plugs with grounded 
compressors.

  Standard plugs and matching 

outlets will reduce risk of electric shock.

b. 

Do not expose compressor to rain or wet 
conditions.

  Water entering a compressor 

will increase the risk of electric shock.

c. 

Do not abuse the cord.  Never use the 
cord for unplugging the compressor.  
Keep cord away from heat, oil, sharp edges 
or moving parts.  

Damaged or entangled 

cords increase the risk of electric shock.

3. 

Personal safety

a. 

Stay alert, watch what you are doing and 
use common sense when operating this 
compressor.  Do not use this compressor 
while you are tired or under the influence 
of drugs, alcohol or medication.

  A moment 

of inattention while operating a compressor 
may result in serious personal injury.

b. 

Use personal protective equipment.  
Always wear ANSI-approved eye 
protection during setup and use.

c. 

Prevent unintentional starting.  Ensure the 
switch is in the off-position before connecting 
to power source or moving the compressor.

4. 

Compressor use and care

a. 

Do not use the compressor if the switch 
does not turn it on and off.

  Any compressor 

that cannot be controlled with the switch 
is dangerous and must be repaired.

b. 

Disconnect the plug from the power source 
before making any adjustments, changing 
accessories, or storing the compressor.

  

Such preventive safety measures reduce the 
risk of starting the compressor accidentally.

c. 

Store an idle compressor out of the reach 
of children and do not allow persons 
unfamiliar with the compressor or these 
instructions to operate it.

  A compressor is 

dangerous in the hands of untrained users.

d. 

Maintain the compressor.  Keep the 
compressor clean for better and safer 
performance.  Follow instructions for 
lubricating and changing accessories.  
Keep dry, clean and free from oil and grease.  
Check for misalignment or binding of moving 
parts, breakage of parts and any other 
condition that may affect the compressor’s 
operation.  If damaged, have the compressor 
repaired before use.

  Many accidents are 

caused by a poorly maintained compressor.

e. 

Use the compressor in accordance with 
these instructions, taking into account 
the working conditions and the work to 
be performed.

  Use of the compressor for 

operations different from those intended 
could result in a hazardous situation.

5. 

Service

a. 

Have your compressor serviced by a 
qualified repair person using only identical 
replacement parts.

  This will ensure that the 

safety of the compressor is maintained.

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Содержание 61615

















Отзывы: