shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are
all available at Harbor Freight Tools. NOTE: For smoother operation, and to
extend the lifespan of the tool, put 3-5 drops of pneumatic Tool Oil (68) in the
attached Air Plug (66) before each use.
STAPLER
QUICK
CONNECTOR
QUICK
COUPLER
AIR
HOSE
QUICK
COUPLER
QUICK
CONNECTOR
OILER
REGULATOR
FILTER
AIR
COMPRESSOR
CONNECTION TO AIR SUPPLY
TESTING THE CONTACT SAFETY TRIP MECHANISM
WARNING: Even though the Stapler should be empty during this
procedure, ALWAYS point the Stapler at a piece of scrap wood when test
ing.
1.
Make sure the tool is disconnected from its air supply.
2.
Completely empty the Magazine B (49) of Staples (69).
3.
The Stapler should not fire if the Drive Guide (48) is not depressed against the
workpiece.
4.
Make sure the Trigger (35) and Drive Guide (48) move freely, without sticking.
TRIGGER
(35)
MAGAZINE B (49)
DRIVE GUIDE (48)
SKU 42332 For technical questions, please call 1-800-444-3353 PAGE 6
AIR PLUG
(66)
