25.
Take caution, as some woods contain preservatives such as copper
chromium arsenate (CCA) which can be toxic. When stapling these materials
extra care should be taken to avoid inhalation and minimize skin contact.
WARNING: Some dust created by power sanding, sawing, grinding, drill
ing, and other construction activities contain chemicals known (to the State of
California) to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
* Lead from lead-based paints,
* Crystalline silica from bricks, cement, and other masonry products,
* Arsenic and chromium from chemically treated lumber.
(California Health & Safety Code § 25249.5, et seq.)
26.
Stay within air pressure capacity. Never operate the Stapler above 95 PSI.
27.
Hold tool away from head and body. During operation the Stapler may kick
back, causing injury.
28.
Transport Stapler safely. Always disconnect air supply when moving the tool in
the workplace. Carry the tool by the handle to avoid contact with the trigger.
29.
Avoid working alone. If an accident happens, an assistant can bring help.
30.
Note: Performance of the compressor (if powered by line voltage) may vary
depending on variations in local line voltage. Extension cord usage may also
affect the tool performance.
31.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the
operator.
UNPACKING
When unpacking, check to make sure that all accessories listed on page 11 are
included, and the product is intact and undamaged. If any parts are missing or broken,
please call Harbor Freight Tools at the number shown on the cover of this manual as
soon as possible.
OPERATION
For best service, you should incorporate an oiler, regulator, and in-line filter, as
SKU 42332 For technical questions, please call 1-800-444-3353 PAGE 5
