Page 4
SKU 65345
For technical questions, please call 1-800-444-3353.
Unmodified plugs and matching out
-
lets will reduce risk of electric shock.
Avoid body contact with grounded
b.
surfaces such as pipes, radiators,
ranges and refrigerators.
There is
an increased risk of electric shock if
your body is grounded.
Do not expose power tools to rain
c.
or wet conditions.
Water entering
a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never
d.
use the cord to unplug the power
tool. Keep cord away from heat,
oil, sharp edges or moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
If operating a power tool in a damp
e.
location is unavoidable, use a
ground Fault circuit Interrupter
(gFcI) protected supply.
Use of
a GFCI reduces the risk of electric
shock.
personal safety
3.
Stay alert, watch what you are do-
a.
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication.
A moment
of inattention while operating power
tools may result in serious personal
injury.
use safety equipment. Always
b.
wear ANSI-approved eye protec-
tion.
Safety equipment such as
NIOSH-approved dust mask/respira
-
tor, full face shield, heavy-duty work
gloves, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
remove any adjusting key or
c.
wrench before turning the power
tool on.
A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper
d.
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose
e.
clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts.
Loose clothes,
jewelry or long hair can be caught in
moving parts.
power tool use and care
4.
Do not force the power tool. use
a.
the correct power tool for your ap-
plication.
The correct power tool will
do the job better and safer at the rate
for which it was designed.
Do not use the power tool if the
b.
switch does not turn it on and off.
Any power tool that cannot be con
-
trolled with the switch is dangerous
and must be repaired.
Disconnect the plug from the
c.
power source before making any
adjustments, changing accesso-
ries, or storing power tools.
Such
preventive safety measures reduce
the risk of starting the power tool ac
-
cidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool.
Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. check for
e.
misalignment or binding of moving
