SKU 96318
For technical questions, please call 1-800-444-3353.
PAGE 7
NOISE PRECAUTIONS
1.
Prolonged exposure to noise levels above 85 dBA is hazardous to hearing.
Always wear ANSI approved ear protection when operating or working around the
Plate Compactor when it is running.
INSTALLING THE WHEEL KIT
NOTE:
For additional references to the parts listed in the following pages, refer to the
Assembly Diagram.
1.
To move the Plate Compactor back and forth, install the Wheel Kit to underneath
the Plate. The Wheel Kit is pre-assembled and only needs to be installed.
2.
Untie the Wheel assembly from the clamp assembly. See photo, below.
3.
Use the holes on either side of the frame to mount the Wheel Kit. See photo,
below.
Please note:
The mounting arms on the Kit will need to be slightly
spread apart to get the ends of the arms into the holes.
4.
Once the Wheels are mounted, the Plate Compactor can be tilted back and then
moved by the wheels.
Wheel assembly tied
to clamp assembly
Wheel Kit
Mounting
Hole
REV 07h
