Page 6
For technical questions, please call 1-888-866-5797.
Item 63995
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
8. Slide Bottom Cross Beam assembly between
Frame/Foot assemblies and attach with two
sets of Bolts (9), Washers (2) and Nuts (4).
Bolt
(9)
Washer (2)
nut
(4)
Figure G
9. Attach two Header Supports (29) together
with Bolt (28), Washer (24), and Nut (23),
leaving a gap for the Header.
10. Repeat for other two Header Supports.
Header
Support (29)
Bolt
(28)
Washer
(24)
nut
(23)
Figure H
11. Slide Header (30) between Header Support
assemblies and attach with two sets of
Bolts (27), Washers (26) and Nuts (25).
note:
Tighten connections enough to avoid wobbling.
nut
(25)
Washer
(26)
Bolt
(27)
Header
(30)
Figure i
note: use a helper for the next step.
12. Slide Top Cross Beam assembly between
Frame/Foot assemblies and, at the same
time, place Header Support assemblies
outside Frame/Foot assemblies.
13. Attach with two sets of Bolts (10),
Washers (12) and Nuts (13).
note:
Tighten connections enough to avoid wobbling.
Bolt
(10)
Header
Support
assembly
top cross
Beam
assembly
Washer
(12)
nut
(13)
Figure J
14. Hang Springs (22) on Bolts (28) that
connect Header Supports.
Spring
(22)
Figure K
Header
Support
