Page 26
SKU 45656
For technical questions, please call 1-800-444-3353.
GRApHIC OpERATING
(
MOUNTING)
6. Look from the other side.
5. Move the tire so that the nether
bead passes below the front section
of the mounting head and is brought
up against the edge of the rear
section of the mounting head.
4. When you are working with
wheel rims of the same size, it is
not always necessary to lock and
unlock the tools shaft. Instead, move
the swinging arm sideways with the
tools shaft locked.
1. Lock the wheel rim, using the inner
part of the jaws.
2. Put the tire on the rim.
3. Lower the tools shaft until the
mounting head rests next to the
wheel rim and on top of the tire.
Then, lock the tools shaft in position,
using the block support.
