SKU 43468
For technical questions, please call 1-800-444-3353.
Page 3
use eye and ear protection
8.
. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI
approved dust mask or respirator when working around metal, wood, and chemical
dusts and mists. Wear ear protection when sanding for long periods.
Do not overreach
9.
. Keep proper footing and balance at all times. Do not reach over
or across running machines.
maintain tools with care
10.
. Keep tools sharp and clean for better and safer perfor-
mance. Follow instructions for lubricating and changing accessories. Inspect tool
cords periodically and, if damaged, have them repaired by an authorized technician.
Disconnect power
11.
. Unplug when not in use.
Remove adjusting keys and wrenches
12.
. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before plugging it in.
Avoid unintentional starting
13.
. Be sure the switch is in the Off position when not in
use and before plugging in.
Stay alert
14.
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
Check for damaged parts
15.
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not turn On and Off properly.
guard against electric shock
16.
. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
Replacement parts and accessories
17.
. When servicing, use only identical replace-
ment parts. Use of any other parts will void the warranty. Only use accessories in-
tended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
Do not operate tool if under the influence of alcohol or drugs
18.
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
Avoid causing fires
19.
. When sanding metals, remove dust collecting bags and hoses
from the machine. Sparks or hot metal could start a fire. Clean all wood dust before
and after sanding metal.
Avoid flammable liquids
20.
. To avoid possible fires, never use sander near flammable
liquids, vapors, or gases.
Avoid breathing dust
21.
. Wear a dust mask over your mouth and nose.
use proper size and type extension cord
22.
. If an extension cord is required, it must
be of the proper size and type to supply the correct current to the tool without heating
up. Otherwise, the extension cord could melt and catch fire, or cause electrical dam
-
