SKU 39955
For technical questions, please call 1-800-444-3353.
Page 3
Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR
WORK AREA IS:
Free of damp, wet or rainy conditions.
Free of children (never let them handle tools or machinery).
Well-lit.
Clean and uncluttered.
Before Operating
Before using any tool, any part that appears damaged should be carefully checked to determine that it will
operate properly and perform its intended function.
Before operating your Drill Press check for damaged parts.
Make certain that the power is OFF before plugging the tool in.
Make sure all clamps, locks and bolts are tight.
Always check that adjusting keys and wrenches are removed from the machine work surface before plugging
it in.
Use grounded receptacle only for 110 Volt hookup.
Give the Drill Press a test run. If it makes an unfamiliar noise or vibrates irregularly, turn it off, unplug it and
have the problem corrected by a qualified technician.
Make certain to turn off and unplug the Drill Press when doing any maintenance. The tool should always be
turned off and unplugged when not in use.
Keep Guards in place and in working order.
Do not abuse the power cord. Do not yank on cord to disconnect it from outlet. Keep the cord away from
heat, oil and sharp edges.
Note: Performance of this tool may vary depending on variations in local line voltage. Extension
Cord usage may also affect tool performance.
Grounding/Voltage Warning
Common household current is 110-120 volts. As long as the outlet used with the tool is rated from 110-120V
there will be no complications using it with household receptacles. Plug the tool into a 110-120V properly
grounded outlet protected by a 15-amp, dual element time delay or circuit breaker.
NEVER try to plug a 110-120V tool into a 220-240V circuit or serious complications and possible injury to the
operator may occur. The plugs have different shapes to prevent this.
This tool has a three-prong plug. The third (round) prong is the ground. Cutting off the ground will result in a
safety hazard and void the warranty.
If the outlet you are planning to use is the two-prong type, do not remove or alter the grounding prong in any
manner. Use an adapter and always connect the grounding plug to a known grounding source. It is recommended
that you have a qualified electrician replace the two-prong outlet with a properly grounded three- prong outlet.
