manualshive.com logo in svg

Central Machinery 38470, Руководство пользователя и инструкции по безопасности

Поделиться
Скачать
Central Machinery 38470 Скачать руководство пользователя страница 21

Page 21

For technical questions, please call 1-888-866-5797.

Item 38470 
        

The Letter Y

Two blanks are required for this letter:

• 

9-1/2″ long

• 

3-3/4″ long

3-1/4″

3-1/4″

1st Bend

2nd

1. 

Measure 3-1/4″ in from each side of the 9-1/2″ blank.  

2.  Insert the blank into the Bender and make bends short of 90°(around 80°) at each mark.

3. 

Weld the 3-3/4″ blank to the center of the bottom part of the “Y” which you have just formed.

The Letter Z

Three blanks are required for this letter:

• 

7-1/2″ long

• 

4-1/2″ long

• 

4-1/2″ long

1″

1″

1st Bend

2nd

1. 

Measure 1″ in from each side of the 7-1/2″ blank.

2.  Place the blank onto the Bender.  At the first mark, make a bend to 50°.  Take out the 

blank and insert the second end.  At the mark, make another bend to 50°.

3. 

Weld the 4-1/2″ pieces to each side of the 7-1/2″ piece.  The 4-1/2″ pieces should be parallel to each other.

Содержание 38470

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды