CentoLight Moodwasher 4810WP, Руководство пользователя

Страница: 9 / 32

9 9
Moodwasher 4810WP User Manual
Eng
3) DOWN Button
It scrolls down individual items in the selection menu and sub-menus for system
settings (DMX address, Operation Mode, etc.) and decreases values/settings of
parameters.
4) ENTER Button
Press ENTER to access menu levels and confirm parameter value changes.
5) Led Display
It shows the operating mode and other system information.
6) DMX Input & Output
3-pin XLR sockets for connection to a DMX another projector or from control device.
7) Power Input Socket
Plug the power-cord into an AC socket properly configured for this fixture. Please
read “6.2. Power and Wiring” on page 9 for details.
8) Power Output Socket
POWER OUT socket - Moodwasher 4810WP is equipped with an out power con-
nector to be used as power mains source in case of cascade connection up to a
maximum of 4 fixtures .
1st Unit 3rd Unit 2nd Unit
Power Input
100-240Vac - 50/60Hz
up to 4 units
6.2. Power and Wiring
y
Always make sure that the voltage of the outlet to which you are connecting
the product is within the range stated in paragraph “11 - Specification” on page
14 or rear panel of the product (AC100V-240V 50/60Hz).
y
Make sure the power cord is not crimped or damaged. Never connect this prod-
uct to a dimmer pack or rheostat.
y
Never disconnect the product from power cord by pulling or tugging on the cord.
y
To avoid electric shock, all fixtures must be connected to circuits with a suitable