CentoLight Moodwasher 4810WP, Руководство пользователя

Страница: 13 / 32

13 13
Moodwasher 4810WP User Manual
Eng
9 - l
uX
C
harT
Distance: 2m Distance: 3m Distance: 5m
Red 4000 lux 2400 lux 920 lux
Green 10000 lux 5300 lux 1960 lux
Blue 2100 lux 1000 lux 380 lux
White 10000 lux 5200 lux 2020 lux
RGBW 29300 lux 14300 lux 5350 lux
10 - T
roubleshooTing
Problem Probable Cause(s) Remedy
No response from fixture when
power is applies
No power to fixture
Check power cables
Check mains plug
Fixture does not reset correctly Electronic failure Contact service technician*
No light, LED cuts out intermit-
tently, or burns out too quickly
LED missing or blown
Disconnect fixture and contact ser-
vice technician* fo LED replacement
Fixture or LED is too hot
Allow fixture to cool. If problem per-
sists, contact service technician*
Fixture resets but does not
respond correctly to controller
(DMX mode operation)
Controller not connected Connect controller
Incorrect addressing of the
fixtures
Check address setting on fixture and
controller
Bad data link connection
Inspect cables and correct poor con-
nections and/or broken cables.
Conflict between tracking and
vector control
Eliminate scene cross-fade on
controller
Data link not terminated
Insert termination plug in output of
last fixture**
Defective fixture or 2 devices
transmitting on link
Bypass fixtures one at a time until
normal operation is regained: un-
plug both connectors and connect
them directly together
* To contact CentoLight service, see “12 - Warranty And Service” on page 15 or visit www.centolight.com
** For instruction on how to install a DMX terminator, see “6.5. DMX Terminator” on page 11.