CentoLight Lightblaster 200, Руководство пользователя

Страница: 9 / 32

9 9
Lightblaster 200 User Manual
Eng
system settings (DMX address, Operation Mode, etc.), and increases values/settings
of parameters.
DOWN Button - It scrolls down individual items in the selection menu and sub-
menus for system settings (DMX address, Operation Mode, etc.), and increases
values/settings of parameters.
ENTER Button - Press ENTER to access menu levels and confirm parameter value
changes.
MENU
DO
W
N
ENT
ER
DMX IN DMX OUT
POWER IN POWER OUT
UP
2 1
3 4
2) 4 Digit LED Display
It shows the operating mode and other system information.
3) DMX Input/Output Sockets
DMX Input is a 3-pin male XLR socket for connection to a DMX control device. DMX
output is a3-pin female socket for sending the DMX control signal to other units.
4) Power Input / Output Sockets
Plug the power-cord included with Lightblaster 200 into an AC socket properly
configured for this fixture. Please read “5.2. About Power Connection” on page 10
for details.
This fixture is also equipped with an output powercon connector to be used as
power mains source in case of cascade connection up to a maximum of 6 fix-