CentoLight Lightblaster 200, Руководство пользователя

Страница: 13 / 32

13 13
Lightblaster 200 User Manual
Eng
2) 11-ch DMX512 Channel Chart
CH Function Specification
CH1 Dimmer 0-255: Global Linear Dimmer adjustment, from dark to bright
CH2 R dimmer 0-255 : Warm White 1 Linear Dimming , from Dark to Bright.
CH3 G dimmer 0-255 : Pure White 1 Linear Dimming, from Dark to Bright.
CH4 B dimmer 0-255 : Warm White 2 Linear Dimming , from Dark to Bright.
CH5 W dimmer 0-255: Pure White 2 Linear Dimming, from Dark to Bright.
CH6 Strobe 0-255: Strobe effect from slow to fast
CH7
Function
Selection
000-050: Dimmer
051-100: Color Selection
101-150: Jump Change
151-200: Gradual Change
201-250 Pulse Change
251-255 Sound Control
CH8
Function
Adjustment
When CH7 ranges from 51 to 250, it adjusts the speed from slow to fast
When CH7 ranges from 251 to 255, it selects the sound mode and adjusts the micro-
phone sensitivity
6.3. Master/Slave Mode
In case you need to control more Lightblaster 200 simultaneously (all fixtures op-
erate exactly the same way) without the use of a DMX controller, you can use the
Master/Slave function. There is no specific function to be activated on the display;
simply the master unit must be connected first, all the others in daisy-chain through
the DMX IN-OUT connections. All units (master and slaves) should be in same Chan-
nel Mode (all 4CH or 8CH) and same DMX channel.
7 - l
ux
T
able
Distance 1m 3m 5m
Luminance 14580 Lux 1555 Lux 578 Lux
Diameter 230 cm 346 cm 577 cm
Note: 80° Beam Angle; 3000K+6500K LED source combined
8 - T
roubleshooTing
Problem Probable Cause(s) Remedy
No response from fixture when
power is applies
No power to fixture
Check power cables
Check mains plug
Fixture does not reset correctly Electronic failure Contact service technician*