CentoLight Clubwasher 360, Руководство пользователя

Страница: 15 / 36

15 15
Clubwasher 360 User Manual
Eng
Users can select the desired mode by pressing MENU button until they reach the
“T--” page. Press ENTER then press UP or DOWN to choose between “Ton” or “Toff”.
Press ENTER to confirm and MENU to go back to the selection of menu pages.
Ton lets the internal processor to control the Led current consumption and ad-
justs brightness to keep the chip always cooled. Brightness reduction starts when
temperature is 80°C (50% reduction). When temperature goes down to 65°C, the
processor recovers 100% power consumption.
Toff does not control Led power consumption and fan speed is always at maximum.
6.5. Master/Slave Mode
In case you need to control more Clubwasher 360 simultaneously (all fixtures op-
erate exactly the same way) without the use of a DMX controller, you can use the
Master/Slave function. There is no specific function to be activated on the display;
simply the master unit must be connected first, all the others in daisy-chain through
the DMX IN-OUT connections. All units (master and slaves) should be in same Chan-
nel Mode (all 6CH or 11CH) and same DMX channel.
7 - l
ux
C
harT
Distance 1m 3m 5m
Beam Diameter 0,36m 1,10m 3,64m
40° 40°
26000
7000
14000
600
12500
4000
1200
2150
115
1950
1540
450
850
45
845
Full (Lux)
Red
Green
Blue
White