9
Reviewing the Heating Program
To review or edit the heating program use the
PROGRAM
or buttons to navigate
between the 4 individual programming periods for that day. Use the
DAY
button to
step through each day of the week, so the complete 7 day heating program can be
reviewed or edited.
Modifying the Heating Program
To change the heating program:
a.
Press either of the
PROGRAM
or buttons
to enter the programming mode. The time /
temperature settings for period
1
on Monday
(Day 1) will be flashing as shown. The active
period is highlighted by a flashing square around
the numbers at the bottom of the screen and the
selected day is shown with the day indicator.
b.
To adjust the period start time use the or buttons, the ‘OK?’ indicator will
be displayed to confirm the change. Holding the button down will change the time
quickly.
Note: If you are pressing the or buttons and the display flashes the next
period, it means the next period will be pushed forward.
c.
Once the required time is reached press the
button to confirm.
Note:
If the original time setting did not require adjustment press the
button to
move to step ‘d’.
Mon
Tue
Wed
Thu
Fri
Sat
Sun
4
3
2
1
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set
between 3.00am and 2.50am the following day - allowing you to maintain the evening
temperature after midnight. Each temperature level can be set between 5°C and 35°C,
and adjusted in 0.5°C increments. The factory default program for heating is as follows.
Programming the EHE0200154
Period
1
2
3
4
Time
6:30
8:00
18:00
22:30
Temperature
21°C
18°C
21°C
16°C
Period
1
2
3
4
Time
8:00
10:00
18:00
23:00
Temperature
21°C
21°C
21°C
16°C
Monday to Friday
(Day 1 to 5)
Saturday & Sunday
(Day 6 & 7)
