Center 392, Инструкция пользователя, Страница: 9 / 20

Integrating Sound Level Meter
7
○
15
Tripod mounting thread:
For long-term measurements, the unit can be mounted on a camera tripod.
Proceed carefully to avoid dropping the unit.
○
16
Battery Compartment.
6. DATA LOGGER & INTERVAL SETUP
6.1 Recording Data:
Press the button to start recording the measured values. The values are
stored in a memory location. Press button again to stop recording.
Note:
During the recording period, most of the buttons, such as the and
are inoperative. All settings must be made before starting the record
operation.
LCD will show FULL symbol when 64000 recorders are stored in memory.
6.2 Recording Interval Setup:
(1) Press the button and then press the INTV ( ) button, the “ Int ”
appears for interval, as well as a flashing second display.
(2) Now set the desired recording interval in minutes and seconds. Use the
or button to increase or decrease number. Max 1 minute can be set.
The minimum value is limited to “00:01”(=1s). Press INTV ( ) to store the
setting and exit this mode. If you want to abort during a setup process, press
button to cancel.
6.3 Clearing Stored Data:
If you want to clear the memory, power off the unit,
then press and hold button and then press
button and hold at least 5 seconds, then "
CLr "
symbol will appear on the display indicating that the
data have been erased.
Note:
The battery indicator “ ” shows the remaining
battery power. When battery power is extremely
low( ), recording function cannot be performed.