Center 392 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 20

Center 392 Скачать руководство пользователя страница 13

Integrating Sound Level Meter

11

humidity environment.
(4) Keep microphone dry and avoid severe vibration.
(5) Please take out the battery and keep the instrument in low humidity
environment when not in use.

12. MEASUREMENT

(1) Turn power on and select the desired response time and frequency
weighting. If the sound source consists of short bursts or only catching sound
peak, set response to FAST. To measure average sound level, use the SLOW
setting. Select A-weighting for general noise sound level and C-weighting for
measuring sound level of acoustic material.
(2) Hold the instrument comfortably in hand or fix on tripod and point the
microphone at the suspected noise source, the sound pressure level will be
displayed.
(3) When MAX MIN (maximum, minimum hold) mode is chosen, the
instrument captures and holds the maximum and minimum noise level for a
long period using any of the time weightings.
Press the button for 2 seconds to clear the maximum and minimum
reading, “ ” symbol disappears.
(4) Turn off the instrument.

«
...
11
12
13
14
15
...
»

Содержание 392





















Отзывы:

Нет отзывов