Center 265 True RMS Leakage Current Clamp Meter
11
6-5 Resistance Measurement
Switch the main function to
range.
Connect the red test lead to the
“
+
”
terminal and the black lead
to the "COM" terminal.
Connect tip of the test leads to the
points where the value of the
resistance is to be measured.
Read the result from the LCD.
Note
：
When measuring resistance in a
circuit, make sure any power on
the circuit is turned off and any
capacitors are discharged.
7. CHANGING THE BATTERY
When the battery voltage drops below that required for proper
operation of the instrument, the battery symbol will appear on the
LCD display and the battery should be changed.
Before changing the battery, switch t
he main dial to “OFF ”and
disconnect test leads.
Open the back cover using a screwdriver.
Replace the old batteries with two new 1.5V (AAA Size) batteries.
Close the back cover and tighten the screw before using the meter.
