background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 42292 

        

Intended Applications

Use this product only to maintain the charge of a flooded lead-acid battery.   

TO PREVENT BATTERY DAMAGE:

 

Do not use on gel lead-acid or AGM (Absorbed Glass Mat) type batteries.

Note: Check battery voltage with a multimeter before use. 

The Battery MUST be fully charged to at least 12 Volts.

The Float Charger prevents self-discharge of the battery, while maintaining and extending 

the life of rechargeable 12 volt lead-acid batteries.  It maintains a battery charge for batteries 

rated from 5 – 125 Ah (amp-hours), by providing a 13.2 VDC maximum output.  Other types of 

chargers provide a strong, rapid charge but tend to boil out liquids and decay electrodes.  

Safety Warnings and Precautions

 

Read all safety warnings and instructions.  Failure to follow the warnings and instructions  

may result in EXPLOSION, electric shock, fire and/or serious injury.   

Save all warnings and instructions for future reference.

1.  Use on fully charged 12 volt lead-acid batteries only.

2.  Do not use if battery voltage is less than 12 volts.

3.  Do not make connections to battery near 

open flame, sparks, or when smoking.

4.  Connect to battery before plugging 

charger into electrical outlet.

5.  Connect cable clips to proper terminals on battery: 

black clip to negative (–), red clip to positive (+).

6.  Do not touch clips together while 

charger is plugged in.

7.  Do not place charger or electrical 

connections on ground or floor.

8.  Do not turn on equipment that battery 

is connected to while charging.

9.  Remove charger AC Adapter from electrical outlet, 

and disconnect the battery clamps when finished.

10. Do not pull power cord to remove 

AC Adapter from electrical outlet.

11.  Make sure battery is vented. 

Remove battery cell caps before charging. 

If battery is maintenance free and non-fillable, 

it has vent slots - keep vents clear and dirt free.

12. Use this product in accordance with the battery’s 

and vehicle’s manual recommendations, 

safety warnings and charging instructions.

13. Do not charge battery in an enclosed area.

14. Do not leave charger or battery unchecked for 

extended periods of time to reduce risk.

15. Plug into a surge protected outlet.  

Surges or variations in electrical power supply 

could cause battery damage or explosion.

16. 

Batteries can explode under certain conditions; 

excessive heat and/or poor ventilation can 

cause battery explosion. 

Do not cover or otherwise obstruct air circulation 

around the AC adapter when in use.

17. WARNING: The cord of this product contains 

lead and/or di (2-ethylhexyl) phthalate (DEHP), 

chemicals known to the State of California 

to cause cancer, and birth defects or other 

reproductive harm. Wash hands after handling.  

(California Health & Safety Code § 25249.5, 

et seq.

)

 SAVE THESE INSTRUCTIONS.

Содержание 42292

Страница 1: ...e reference When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2000 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this man...

Страница 2: ...s on battery black clip to negative red clip to positive 6 Do not touch clips together while charger is plugged in 7 Do not place charger or electrical connections on ground or floor 8 Do not turn on equipment that battery is connected to while charging 9 Remove charger AC Adapter from electrical outlet and disconnect the battery clamps when finished 10 Do not pull power cord to remove AC Adapter ...

Страница 3: ...90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential ...

Страница 4: ...O MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PART...

Отзывы: