Safety instructions
!
WARNING
Electric shock could
occur if used out doors
or on wet surfaces.
Please read all instructions before using this Electric Powerhead.
Save these instructions. INTENDED FOR HOUSEHOLD USE ONLY.
1) Unplug and disconnect power before servicing.
2) Always turn off this appliance before connecting
or disconnecting either hose or motorized
nozzle.
3) Do not pick up anything that is burning or
smoking, such as cigarettes, matches or hot
ashes.
4) Use only as described in this manual. Use only
manufacturers recommended attachments.
5) Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
6) Do not handle system of appliances with wet
hands.
7) Turn off all controls before unplugging.
8) Do not use with damaged cord or plug. If
appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, return it to distributor.
9) Do not allow to be used as a toy. Close attention
is necessary when used by or near small
children.
10) The hose contains electrical wires. Do not use if
damaged, cut or punctured. Avoid picking up
sharp objects.
11) Do not put any object into openings.
12) Do not use with any opening blocked; keep free
of dust, lint, hair, and anything that may reduce
air flow.
13) Keep hair, loose clothing, fingers, and all parts
of the body away from openings and moving
parts.
14) Do not leave vacuum or brush when plugged in.
Unplug from outlet when not in use and before
servicing.
15) Do not pick up flammable or combustible
liquids such as gasoline or use it in areas where
they may be present.
16) Use extra care when cleaning on stairs.
CT22QD
Premium Electric Power Brush
This power brush is used to vacuum
carpets. It has a 14” edge to edge
brushed head to create a wider
cleaning path. It is to be used with the
integrated telescopic wand.
Features include:
Quietdrive™
•
- Multi-grooved rein-
forced belt for continuous contact and
efficient transfer of power to the brush.
Quick Wand Release
•
- For an easy
switch from carpet to hard floor, edge
cleaning or above floor cleaning.
4 Level Height Adjustment
•
- Adjusts
to match surface being cleaned.
Soft Bumper
•
- Wraps around brush
to protect baseboards and furniture.
Headlight
•
- For lighting your clean-
ing path.
Active Brush Edge Cleaner
•
- Guide
either side of the brush along base
boards or next to furniture to help
remove dirt trapped at carpet edges.
Cen-Tec CT23QD
Electric Brush Parts Explosion
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
32
33
34
35
36
37
CENTEC Part # Object Description
38672
38683
38694
38705
38716
38727
38738
56306
38749
38760
40383
37308
38771
38782
40933
40625
38793
38804
38815
41120
37330
37341
40317
40944
56058
37319
40284
40999
38826
38837
38848
38859
37176
37187
40427
FLOOR NOZZLE UPPER
BUTTON (EXTENSION) (DECO)
WINDOW COVER (HEIGHT ADJ.)
FURNITURE GUARD
VALVE B (SUCTION CONTROL -N.B.S.)
VALVE A (SUCTION CONTROL B.S.)
FLOOR NOZZLE COVER (W/ LENS) (DECO)
SERVICE, SCREW
CONNECTION PIPE ASSEMBLY (NOZZLE) PC
FOOTPEDAL Q.R.
SWIVEL SEAL (2)
SERVICE, SCREW, PAN HD #8 - 18 X 35MM (CENTEC)
SWIVEL CAP
PEDAL / HANDLE RELEASE
INDICATOR BLOCK ASSY
LIFTER
FILTER - INTAKE/EXHAUST
WIRE CONNECTOR
OVERLOAD PROTECTOR (KUOYUH 2.5)
LEAD WIRE UNIT
SERVICE, BULB SOCKET (CENTEC)
SERVICE, BULB LIGHT (CENTEC)
MOTOR BRIDGE
SERVECE, SCREW #8 - 18 X 5/8 (CENTEC)
MOTOR GASKET
SERVICE, MOTOR ASSEMBLY (CENTEC)
SERVICE, MOTOR ADJUSTMENT SPRING (CENTEC)
BELT
SCR THRCUT PAN 8 - 18 X 1 7/8
AGITATOR UNIT
BRUSH COVER
FLOOR NOZZLE LOWER
SERVICE, NOZZLE ROLLER (CENTEC)
SERVICE, ROLLER SHAFT (CENTEC)
FRONT AXLE ASSY
