Cembre Rolly 1000, Руководство по эксплуатации и обслуживанию

Страница: 13 / 22

3.3.1 Distance/black line sensor positioning
Media will advance correctly only if the sensor is correctly aligned. Manually
position the sensor, depending on the media being printed, as follows:
- For TTL…media, align the long line
marked on the sensor with the centre
of the left hand label, see fig. 9a.
Figure 9a
- For TPM-ROLL media, align the long line
with the centre of the lateral holes to the
left of the reel, see fig. 9b.
Figure 9b
- For KM-ROLL media, align the
short line marked on the sensor with
the centre of any label, see fig. 9c.
Figure 9c
- Using the Print head lever, lower the print head and lock the lever.
- Close front and side covers.
- Power up the printer.
11
Long line of the detector in the
centre of the left hand label
Long line of the detector in
the centre of the lateral holes
Holes
TTL… media
Sensor
Sensor
Stop
Stop
Stop
Short line of the detector
in the centre of any label
Sensor
KM-ROLL media
TPM-
ROLL
media