7
2.6) Head opening
When required, the upper part of the head can be removed
to permit an easy introduction of the connector or removal
of it after crimping.
Proceed as follows (with reference to
Fig. a
):
1
Hold the handle (1) and pull the latch (9).
2
Turn the top die holder (200) through 90 degrees.
3
Remove the top die holder (200).
– Insert the conductor into the connector and introduce the
connector into the head.
1
Relocate the top die holder (200) (Refer to
Fig. b
).
2
Pull the latch (9).
3
The holder automatically turns into the locking position
(Refer to
Fig. c
).
CLICK
2
2
1
3
1
3
CLICK
2
2
1
3
1
3
CLICK
2
2
1
3
1
3
connector
9
200
1
9
200
Before crimping operations, check
that the head is correctly reassembled
and latch (9) is correctly located.
Fig. a
Fig. b
Fig. c
conductor
