2
2
3
4
1
1
2
3
4
TG. 0356
Before using the tool, carefully read the instructions in this manual.
When operating the tool, keep hands away from the danger zone.
Operate only with dies and product inserted.
DANGER
The user should be properly
trained in the correct
procedures required for work
on or around electrical lines.
ELECTROCUTION
HAZARD
Operation and safety methods
may vary in accordance with
the guidelines of each utility.
For your own safety, ensure
that you fully comply with all
safe operations guidelines
required by your respective
power utility.
BEFORE USING THIS TOOL READ THE SAFETY
WARNINGS and recommended practices described in
the manual. Failure by the operator to read and fully
understand the warnings will leave this person unquali-
fied to use and operate the tool. Failure to observe all
warnings and instructions could result in property
damage, severe personal injury or death.
WARNING
CAUTION
TG. 0934
170 mm
40 mm
TG. 0934
TG. 0935
Before operating make sure the
latch is secure. Latch improperly
secured can cause tool damage
and personal injury.
CAUTION
25 mm
50 mm
TG. 0935
Keep labels clean and legible, replace if necessary.
TG. 0934
TG. 0935
TG. 0356
TG. 0947
ONLY OPERATE WITH
THE TOP DIE HOLDER
IN PLACE
WARNING
25 mm
50 mm
TG. 0947
TG. 0947
WARNING LABELS
