Cembre LD-16B Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 40

Cembre LD-16B Скачать руководство пользователя страница 23

23

clamping device

30

11.5) Assembly of the DBG-F2 clamping device

The clamping device is ﬁ tted to the front plate of the

drill, and secured with the two screws M8x25 (30). The

assembly is illustrated in the Figure.

To disassemble it, using the 6 mm Allen key supplied

in the ACCESSORIES KIT of the drill.

If the clamping device must be removed, make

sure that, on reassembly, the two locking screws

(30) and washers are ﬁ rmily fastened.

front plate

6 mm Allen key

11.6)  Assembling positioning templates

Only Cembre positioning templates and jigs are to be used with the rail drill.

Choose the correct positioning template for the rail proﬁ le to be drilled.
Place the positioning template on to the front plate of the drill, aligning the two reference pins with the holes

in the template.

MPAF.. MPSR and MPAU

positioning templates are secured to the front plate by means of two screws M6x16 by

using the 5 mm Allen key supplied in the ACCESSORIES KIT of the drill.
For special positioning templates (e.g

MPD...

&

MPR...)

use the two screws M6x25.

5 mm Allen key

front plate

M6x16 screw

M6x16 screw

Reference pins

«
...
21
22
23
24
25
...
»

Содержание LD-16B









































Отзывы:

Нет отзывов