14
Two high effi
ciency LED worklights enable effi
cient illumination of the drilling area (e.g. in tunnels or outdoors at
night).
Use the ON/OFF switch (16) on the side of the motor switch to activate or deactivate the automatic illumination of
the lights on the front of the motor.
ON position:
the lights turn on automatically at start-up and turn off automatically 20 seconds after the motor is
switched
off .
OFF position:
no automatic illumination, the lights remain off .
The motor switch (15) is placed on the motor in an easily visible position and can
be rapidly activated in case of emergency.
It is a tilt switch and provided with an interlock device to avoid unintentional start-ups.
The switch has two specifi c functions:
Start / Stop of the drill:
slide the interlock device forward (
1
) and
press the switch into operating position (
2
).
To stop the drill, return the switch to its cen-
tral position (0).
1
2
1
2
“Indexing” function:
is useful for easy access to the grub screws on the drill
spindle.
With one fi nger, keep the interlock device forward
(
1
)
and with another repeatedly push the switch down (
2
).
With each press of the switch, the spindle rotates by
10°.
16
OFF in
central position
5. MOTOR ON/OFF SWITCH (EMERGENCY)
6. LED WORKLIGHTS ON/OFF SWITCH
15