6
2.5) Head rotation
For ease of operation, the tool head can rotate through 180°.
Do not attempt to rotate the head when the hydraulic circuit is pressurised.
2.6) Rest setting
After completion of the work, press the pressure release lever (3) to release the oil pres-
sure in the tool
.
Fit the handle restraint (5).
3. WARNING
The tool is robust, completely sealed, and requires very little daily maintenance. Compli-
ance with the following points, should help to maintain its optimum performance:
3.1) Thorough cleaning
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any
residue, especially close to pivots and moveable parts.
3.2) Storage case
When not in use, the tool should be stored
and transported in the plastic case, to prevent
damage. The case, type
VAL-P1
, is suitable for
storing the tool, the accessories and up to 20
die sets and pre-prepared compression con-
nectors. Size 445x290x95 mm (17.5x11.4x3.7
inches). Weight 1,2 kg (2.65 lbs).
ENGLISH