Cembre B70M-P24, Руководство по эксплуатации и обслуживанию

Страница: 5 / 48

5
ENGLISH
hydraulic pump
oil filler cap (
code
6800076)
anchor ring for shoulder strap (
code
6040427)
integral handle
mechanical pressure release button
(
code
6000476)
battery residual power display
socket for connecting the remote hand controller
socket for connecting to external 24 v dc supply
*
quick release female automatic hydraulic coupler
(
code
6060122)
quick release female automatic hydraulic coupler
,
for use with insulated pump only (
code
6060130)
remote hand controller
*
(
code
2596112)
n i
-
mh rechargeable battery
self
-
ventilating battery charger
,
220 - 240 V / 50-60 Hz (
code
2596100)
3 metre
(
9.8
ft )
high pressure flexible hose with quick release
male / female automatic hydraulic couplings
*
shoulder strap (
code
6000354)
canvas bag type cvb
-
009
for storing accessories
(
code
2593309)
remote pneumatic hand controller
,
for use with insulated pump only (
code
2596113)
The pump is supplied with the battery completely discharged; before use, fully charge the battery
using the charger supplied (see § 3.5).
In order to extract the battery from its housing we recommend you lay the pump on its back (see
Fig. 2): press the release button downwards (1) remove the battery (2); to insert it, simply slide it in
along the guides until it locks.
3.1) Setting up
– Carry the pump using the integral handle (04) or the shoulder strap (14) attached to the rings
(03) (see Fig. 9).
– Position the pump on a flat surface. There are two stable work positions recommended:
- vertical, resting on its base.
- horizontal, resting on its back where moulded ribs improve firmness and stability (see Fig. 3).
Should it be necessary however, the pump’s hermetically sealed hydraulic circuit allows it to
operate in any position.
– Remove "
REMOTE CONTROLLER " protective cap, connect the remote hand controller to the
socket (07) (see Fig. 4): tighten the plug (90) by turning the bezel clockwise until it locks.
– Check the high pressure hose (13), if abrasions are evident, or if the hose is kinked or damaged,
do not use; connect the hose to the hydraulic head, and to the corresponding female coupler
(09) on the pump (see Fig. 5).
*
Not applic
able t
o insulat
ed pump
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
09
2. UNIT DESCRIPTION (Ref. to Fig. 9)
3. INSTRUCTION FOR USE