12
6
3
12
17
10
18
TABLE 1
9
3.1) Using the battery charger
Carefully follow the instructions in the battery charger manual.
3.2) General information on how to use batteries
In order to maximise battery life, please follow these rules:
– Use the battery until the automatic residual energy display still has 1-2 LEDs showing: this
means the battery is almost completely discharged and no loss in the life of the battery has
been
caused.
– Be particularly careful when charging a new battery the
fi
rst 2-3 times in order to be certain
of maximising the available energy level.
– Allow the battery to cool down to ambient temperature prior to recharging.
– Rest the battery charger for at least 15 minutes between charges.
4. MAINTENANCE
The tool is robust, completely sealed and requires very little daily maintenance.
Compliance with the following points should help to maintain the optimum performance of
the tool:
4.1) Thorough cleaning
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any
residue, especially close to moveable parts.
4.2) Storage
When not in use, the tool and accesories should be stored and transported in the relevant
canvas bag to prevent damage.
uld be stored and trans