6
2.3) Compression
Insert the conductor in the connector and press the operating button (3): the ram will gradually
move forward until the two dies touch. It is recommended to keep operating until the maxi-
mum pressure valve is activated and a "click" is heard, after which the dies will automatically
re-open until the ram is fully retracted. It is always possible to interrupt automatic retraction
of the ram by a short push on the operating button (3).
2.4) Head rotation
For ease of operation the tool head can rotate through 180°, allowing the operator to work in
the most comfortable position.
Warning: do not attempt to rotate the head when the hydraulic circuit is pressurised.
2.5) Release of dies
(Ref. to Fig. 1)
Press the pressure release button (8), the ram will retract and open the dies.
2.6) Battery status
(Ref. to Fig. 2)
Inserting the battery into the tool or releasing
the operating button causes the residual bat-
tery capacity to be automatically displayed for 5
seconds on the indicator.
The number of LEDs illuminated indicates the
residual capacity.
6 LEDs illuminated: fully charged
3 LEDs illuminated: 50 % capacity
1 LED illuminated: minimum charge
2.7) Insertion/replacement of battery
To insert the battery, slide it into its seat until it
locks
(Ref. to Fig. 3).
To replace an exhausted battery, press the, button
and slide it forward.
FIG. 3
FIG. 2
ery
t until it
he, button
FIG. 3
15
&RGH1
'(6&5,37,21
4W\
,WHP
635,1*
%$//
7,(
'6&+1255:$6+(5
0[6&5(:
/(9(5635,1*
0[6&5(:
25,1*
25,1*
&8:$6+(5
%2'<
5(/($6(*5283
635,1*
635,1**8,'(
6&5(:
'6&+1255:$6+(5
635,1*6833257
5(6(592,5&$3
&203/(7(/(9(56833257
&203/(7(0(0%5$1(
&203/(7(68&7,216&5(:
&203/(7(-$:6833257
6833257
52//
3,152//
-$:66833257
635,1*
5$0*8,'(5,1*
3,1*5,3
-$:/2&.,1*3,1
&,5&/,3
0[6&5(:
5$05(7851635,1*
635,1*
&</,1'5,&$/3,1
0[6&5(:
TABLE 2 (ITEM 10 IN TABLE 1)