Cembre B54N-YD6, Руководство по эксплуатации и обслуживанию, Страница: 4 / 10

4
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
1. GENERAL CHARACTERISTICS
B54N-YD6
suitable for installing electrical compression connectors
for conductors up to 150 mm 2 (300 MCM)
54 (6)
340 (4,900)
470 x 119 x 79 (18.5 x 4.7 x 3.1)
3,2 (7)
18
18 / 3.0 Li-Ion
120 / 50-60
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent.
the tool is equipped with a maximum pressure valve.
Application range:
Crimping force kN (sh ton):
Rated operating pressure bar (psi):
Dimensions LxWxH mm (inches):
Weight with battery kg (lbs):
Motor Volt DC:
Battery ( Makita BL1830) Volt / Ah:
Battery charger supply Volt / Hz:
Recommended oil:
Safety:
Types of jaw supplied:
(see table A page 9 for compatibility)
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
Tests carried out in compliance with the indications contained in UNI EN ISO 3744 and UNI EN ISO 11202
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to .............................................................................. 72.9 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is ......................................................................< 130 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to ............................................................................................................. 77.8 dB (A)
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI 5349-1/2 and UNI EN 28662
part 1
st Standards, and under operating conditions much more severe than those normally found,
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec 2 .
TOOL TYPE:
B54N-YD6-8
CDD 6
with D3 groove
to accept all "W"
style crimping
dies + "BG" fi xed
groove
B54N-YK
CDK
with groove to ac-
cept all "O"
style Kearny
crimping dies
CDD 6-8
with D3 groove
to accept all "W"
style crimping
dies + "O" fi xed
groove
17
4
19
18
1
250
10
9
20
16
17
15
21
57
400
300
15
100
14
7
220
500
*
TIGHTENING TORQUE
COUPLE DE SERRAGE
DREHMOMENT
PAR DE TORSION
COPPIA DI SERRAGGIO
8 Nm (5.9 lbf ft)
8
210
11
8
6
11
220
7
9
TABLE 2 (ITEM 10)