Cembre B54-YD6, Руководство по эксплуатации и обслуживанию, Страница: 6 / 10

2.3) Compression
Insert the conductor in to the connector and press the operating button (3): the ram will
gradually move forward until the two dies touch. It is recommended to keep operating
until the maximum pressure valve is activated and a "click" is heard, after which the dies
will automatically re-open until the ram is fully retracted. It is always possible to interrupt
automatic retraction of the ram by a short push on the operating button (3).
2.4) Head rotation
For ease of operation the tool head can rotate through 180°, allowing the operator to work
in the most comfortable position.
Warning: do not attempt to rotate the head when the hydraulic circuit is pressurised.
2.5) Release of dies
(Ref. to Fig. 1)
Press the pressure release button (8), the ram will retract and open the dies.
2.6) Battery status
(Ref. to Fig. 2)
Inserting the battery into the tool or releasing
the operating button causes the residual bat-
tery capacity to be automatically displayed for
5 seconds on the indicator.
The number of LEDs illuminated indicates the
residual capacity.
6 LEDs illuminated: fully charged
3 LEDs illuminated: 50 % capacity
1 LED illuminated: minimum charge
2.7) Insertion/replacement of battery
To insert the battery, slide it into its seat until
it locks
(Ref. to Fig. 3).
To replace an exhausted battery, press both
lateral red buttons simultaneously and slide
it forward.
5 14
FIG. 3
Code N° DESCRIPTION
Qty Item
6520200 300 65 SPRING 1
6740120 300 66 7/32" BALL 1
3041735 300 67 TIE 2
6640205 300 68 D. 4 SCHNORR WASHER 1
6900052 300 69 M4x6 SCREW 1
6000602 300 70 LEVER SPRING 1
6900054 300 71 M4x6 SCREW 1
6360022 300 72 O-RING 1
6360125 300 75 O-RING 1
6641020 300 77 Ø 6 CU WASHER 1
6160081 300 310 BODY 1
6000697 300 320 RELEASE GROUP 1
6520240 300 320 1 SPRING 1
6000318 300 320 2 SPRING GUIDE 1
6900021 300 320 3 SCREW 1
6000849 300 320 4 D. 3 SCHNORR WASHER 1
6000608 300 320 65 SPRING SUPPORT 1
6000596 300 350 RESERVOIR CAP 1
6000588 300 360 COMPLETE LEVER SUPPORT 1
6000601 300 400 COMPLETE MEMBRANE 1
6900602 300 500 COMPLETE SUCTION SCREW 1
6000620 600 COMPLETE JAW SUPPORT 1
6000621 600 2 SUPPORT 1
6000632 600 3 ROLL 2
6560200 600 4 PIN ROLL 2
6000622 600 5 JAWS SUPPORT 1
6000623 600 6 SPRING 1
6040564 600 7 RAM GUIDE RING 1
6000624 600 8 PIN GRIP 1
6000633 600 9 JAW LOCKING PIN 1
6700051 600 12 Ø 10 CIRCLIP 1
6900013 600 13 M3x4 SCREW 1
6520030 600 14 RAM RETURN SPRING 1
6520601 600 15 SPRING 1
6760420 600 16 CYLINDRICAL PIN 1
6900180 600 17 M4x10 SCREW 1
FIG. 2
TABLE 2 (ITEM 10 IN TABLE 1)