2. INSTRUCTIONS FOR USE
The tool is equipped with automatic return of the dies once the crimping operation is
completed.
The interchangeable crimping jaws have thermoplastic rubber covers on outside edges.
Residual battery capacity level is automatically displayed after every cycle.
The part reference “B54...” includes the following:
– Basic tool complete with battery
– Spare battery
– Battery charger complete with CBA96-144 adapter
– Canvas bag.
2.1) Preparation
With the tool in the rest position (the ram fully retracted) proceed as follows:
– Select the appropriate groove or die set for the connector to be crimped.
– Insert the dies into the jaws of the tool (see § 2.8).
– Insert the conductor into the connector.
2.2) Die advancement
(Ref. to Fig. 1)
Grip the tool fi rmly and comfortably.
– Position the connector in the groove
dies and ensure the correct location
of the crimp.
– Press operating button (3) to activate
the motor-pump group for the ad-
vancement of the ram. To halt the
advancement, release the operating
button and the motor will cut out.
Make sure the dies are exactly po-
sitioned on the desired crimp point
otherwise re-open dies following
instructions as per § 2.5 and reposi-
tion the connector.
15
4
3
8
FIG. 1
24
26
31
19
18
17
75
30
67
16
350
67
64
65
66
310
70
45
63
77
360
71
62
5
4
3
3
12
13
15
16
6
8
17
11
10
11
600
9
2
1
1
65
27
72
69
3
4
2
320
68
*