CEMB SM675TI, Руководство пользователя

Страница: 43 / 208

User’s manual 43
EN
9.6.c. Lower bead mounting
- Place the bottom bead of the tyre underneath the tool and at the same time apply a
little pressure to the tyre by hand while starting to rotate the wheel (pedal ) for
easier bead insertion.
- Rotate until tyre mounting is complete (Fig. 32b).
9.6.d. Upper bead positioning
- Position the upper tyre bead.
WARNING
Take care that the tyre does not slip underneath the tool.
9.6.e. Bead presser roller positioning
- Lower the bead presser roller (control ) (A) until it is level with the well of
the rim.
2
1
33a 33b
9.6.f. Upper bead mounting
- Rotate the wheel using pedal to start mounting the upper bead. Press manually
the tyre bead to keep it inserted in the channel until the bead assembly is successfully
completed (fig. 34a).
NOTICE
For oversized (more than 19’’) or particularly tough wheels, it is recommended
the use of the pneumatic bead presser. In this case the following procedure
must be applied