Page 8
2
Installation
Once the MAXX-700 unit has been received and the package has been opened it must be
properly installed before operation.
2.1 Pre-installation
The MAXX-700 Patient Positioning
System
provides an optical aid for rapid and accurate
patient positioning and repositioning for therapy and virtual simulation machines.
Various combinations of the
MAXX-700 CH (Crosshair)
and the
MAXX-700 S (Sagittal)
are
used with different systems. A typical system consists of:
•
Two
MAXX-700 CH
crosshair lasers, mounted on each side, beam crosshairs along the
X-axis.
•
One
MAXX-700 CH
crosshair laser, mounted on the ceiling, beams a crosshair vertically
along the Z-axis.
•
The
MAXX-700 S
sagittal laser beams a straight line in the Z-Y plane.
•
One
MAXX-700
remote control.
2.2 Power Supply
Each laser is provided with a universal power supply (transformer) with an input of 100 to 240
volts at 50 to 60 Hz. A 1.2 meter (4 foot) power cord supplies 12-volt DC power to the MAXX-
700 laser unit.
