CEM DT-9560, Руководство по эксплуатации, Страница: 17 / 28

17
True RMS Autoranging Digital Multimeter
4-9.Capacitance Measurements
WARNING:
To avoid electric shock, disconnect power to the unit under test and discharge all
capacitors before taking any capacitance measurements. Remove the batteries and unplug the
line cords.
1.Set the rotary function switch to the
CAP position.
Ω
2.Insert the black test lead banana plug into the negative COM jack; Insert the red test lead banana
plug into the positive V jack.
3.Press the MODE button to indicate “ nF ” on the display.
4.Touch the test leads to the capacitor to be tested.
5.The test may take up to 3 minutes or more for large capacitors to charge. Wait until the readings
settle before ending the test.
6.Read the capacitance value in the display.
RANGE
MODE
REL
Hz%
HOLD
MAX
MIN
OFF
Ω
CAP
mA
Auto Power Off
10A
mA
μ A
10A
V
FUSED
MAX
800mA
COM
CAT IV 600V
CAT III 1000V
Hz
%
Hz%
Hz%
Hz%
Hz%
mV
Hz%
True RMS Autoranging Digital Multimeter
V
VFD
VFD
V Ω CAP
Hz%
30 sec MAX
every 15 min