Series VC-50 / SVC-50 / MVC-50 / LVC-50
49-MCVC50EN03
USER´S MANUAL
5
6.4. ITEM
COUNTING
When the scales show the weight, press
to initiate the item counting function.
The scales will show "P 10" , to request a sample size of 10 items. Change the sample size by pressing
.
The display will move through the different options: 10, 20, 50, 100, 200 and back to 10.
Place the selected number of items on the platform and press
-
.
When the number of items has been
calculated, the number of items on the platform will be shown, and from then on the scales will show the
number of items that are placed on the platform.
If packaging is to be used when counting items, the empty packaging must first be tared. To do this, place
the empty packaging on the platform and press
.
Press
to return to normal weighing mode.
6.5. CHECKWEIGHER MODE
6.5.1. Operative
The checkweigher mode triggers an acoustic signal when the weight situated on the platform matches or
exceeds the values stored in the memory. The memory stores values for a upper and lower limit.
6.5.1.1. Checkweigher
modes
Weight check range:
The check of the weight is done in a range between the limits.
This sets different values for upper and lower limits where the upper value is higher than the lower value.
Weight Check Key Point:
The check of the weight is done in a exact point.
This sets the same value for the upper and lower limits.
6.5.1.2.
Options of the alarm
Mode 2 of the functioning of the alarm
For the weight check range, the display will show OK and the alarm will beep if the weight is within the two
limits.
For the weight check key point, the display will show OK and the alarm will beep if the weight matches the
limits.
Mode 3 of the functioning of the alarm
For the weight check range, the display will show OK and the alarm will beep if the weight fall outside the
limits.
For the weight check key point, the display will show OK and the alarm will beep if the weight does not match
the limits.