DAB1001 User Guide
15
To Enable AutoScan
If it is not possible to use the AFD feature you can use AutoScan to automatically search for
unused FM frequencies. When this function is activated, the DAB1001 will keep searching for 3
available FM frequencies automatically. You may select one of them as the new transmitting
frequency and tune your car radio in this new FM frequency to receive DAB services
continuously.
1.
In the menu function, rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
SYNCMODE
》
.
2.
Press the
Rotary Knob
, and then rotate
the
Rotary Knob [
◄] [►]
until the screen
shows
《
AUTOSCAN
》
.
3.
Press the
Rotary Knob
, the function of AutoScan is now enabled and the DAB1001 is
operating in the AutoScan mode. The screen will then show
《
DONE
》
.
Note:
Switching to the AutoScan mode does not change the current FM transmitting frequency
as it remains the same as before the switch.
While in the AutoScan mode, DAB1001 will automatically search for three unused FM
frequencies and save them into the memory in sequence (from frequency 1 to frequency
3) through the SYNC
function. (refer to section on page 18).
To Set Antenna Power
For DAB1001 to work with the supplied active antenna, the antenna power must be set to ON. If
you replace the supplied antenna with any third party antenna, you must set the antenna power
to OFF.
1.
In the menu function, rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
ANTENNA
》
.
2.
Press the
Rotary Knob
to enter the antenna power selection operation.
3.
Then you can rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
ANT ON
》
to
set the antenna power on.
4.
Or you can rotate
the
Rotary Knob [
◄] [►]
until the screen shows
《
ANT OFF
》
to set
the antenna power off.
5.
Finally, press the
Rotary Knob
to set the antenna power. The screen will then show
6.
《
DONE
》
.
Note
:
The default Antenna Power setting is ON
To Reset DAB Presets
1.
In the menu function,
rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
DABRESET
》
.
2.
Press the
Rotary Knob
to perform a reset operation for DAB Presets.
3.
If you do want to reset, rotate
the
Rotary Knob [
◄] [►]
to find
《
YES
》
and then press
the
Rotary Knob
for confirmation.
4.
The screen will show
《
RESETING
》
to indicate that DAB reset is in progress.
5.
The system will perform a scan of DAB stations automatically after the DAB has reset.
