DAB1001 User Guide
10
Setting up the DAB1001
1.
Turn on your in-car audio system.
2.
Enable the AF function on your car radio if it is equipped (Consult your car radio manual
or the car dealer if your car radio has AF feature). This feature is typically enabled as
standard.
3.
Tune the car radio’s FM frequency to FM 87.6 MHz, which is the same as DAB1001
default FM TX frequency.
4.
Start DAB1001 by plugging the cigarette-lighter power plug into the cigarette lighter, the
audio system display will show
《
DABRADIO
》
.
5.
DAB1001 will perform a Scan of DAB stations automatically.
6.
If FM 87.6 MHz is already used by an existing FM station, change the initial FM TX
frequency as below:
DAB1001 Operation
Press and hold
SYNC
, the DAB1001 will now set a new and clear frequency to
transmit the FM signal.
Car Radio Operation
Use auto scan function of your car radio to search for the FM broadcast having
program service name
《
DABRADIO
》
. Tune on this channel. The DAB1001 and car
radio are now synchronized.
7.
Listen to DAB stations using the remote control keys.
8.
To avoid unnecessary draining of the car battery, the DAB1001 will automatically turn off
after 4 hours if it is not being used.
Using the Remote Control
The remote control uses advanced RF communication to operate the DAB1001 and
further can be used from any position within the vehicle (front or rear). Please also note
that due to the time required to update the vehicle’s existing AM/FM RDS radio display
there is typically a “short delay” between pressing a remote control button and the
vehicle display showing the function. This is normal behaviour of the DAB1001 user
interface.
To Turn On or Off DAB1001
The DAB1001 can be turned on or off by the following:
Press the
Rotary Knob,
while DAB1001 is off, to return it to operating mode.
Press and hold the
Rotary Knob,
while DAB1001 is in the operating mode, to turn it off.
To Listen to the DAB Stations
There are two options available for you to select and listen to a DAB station:
Quick Tune
and
Step Tune
. Quick Tune allows you to move more quickly through the list of stations to a
specific letter of the alphabet corresponding to the initial letter of a station. Once you have
reached the desired initial character; you can then use Step Tune to move to the exact station.
Quick Tune
Fast rotation of the
Rotary Knob [◄] [►]
tunes to the first station in the next/previous
alphabet. Repeat the action one character at a time, until the screen shows the DAB station
with desired initial character.
