DAB1001 User Guide
14
Note
:
Each time you start DAB1001, if the station list is empty, it will perform a Full Scan of
DAB stations automatically. You may also need to perform a Scan function if you drive
your car to a new area where the broadcasting DAB stations are not on the current
station list.
During a scan the screen will show
《
FFF
N
》
, in which
FFF
shows the current
channel being scanned, and
N
indicates how many stations have been detected.
While the Scan operation is in process, you can press the
Rotary Knob
at any time to
stop the scan.
If the DAB Station List is not empty before scanning then after completion of a scan, the
DAB1001 will revert to playing the last DAB station automatically.
If the DAB Station List is empty before scanning, the DAB1001 will tune in the first
station of the new DAB Station list.
If the DAB Station List is empty before scanning, and there is no station detected by
DAB Scan, the screen will show
《
EMPTY
》
.
To Enable AFD (Automatic Frequency Detection)
There are two AFD modes, AFD_H (High Sensitive) & AFD_L (Low Sensitive). While in AFD
mode, DAB1001 will detect and determine if a frequency change is necessary constantly. Set
AFD_L mode, if you experience the FM frequency is being changed too often. Set AFD_H
mode, if you frequently hear static noise and the FM frequency is not changed.
By default DAB1001 is already set to use AFD_H mode.
Setting AFD
1.
In the menu function, rotate the
Rotary Knob
[
◄] [►]
until the screen shows
《
SYNCMODE
》
.
2.
Press the
Rotary Knob
, and then rotate the
Rotary Knob [
◄] [►]
until the screen
shows
《
AFD_H
》
or
《
AFD_L
》
.
3.
Press the
Rotary Knob
, the AFD function is now enabled and the DAB1001 is operating
in the AFD mode. The screen will then show
《
DONE
》
.
Note:
If your car radio does not have AF feature, the AFD function must not be enabled (refer
to section on page 15)
.
When your DAB1001 identifies a need to switch FM transmission frequency this will
usually force the car radio to change FM frequency automatically and the car radio
display will show
《
AF
Frequency
》
where
Frequency
is the new frequency DAB1001 is
transmitting.
If you hear static noise or a FM program and before AFD tunes to a clear frequency you
can force an immediate frequency change manually by the following methods:
1.
Perform an immediate frequency change (refer to section on page 18).
2.
Recall and change FM Transmitting Frequency Saved in Memory (refer to section on
page 17).
3.
Change the FM Transmitting Frequency Manually (refer to section on page 16).
4.
Reset the FM transmitting frequency to 87.6MHz (refer to section on page 13).
While in AFD mode, if the FM transmitting frequency for DAB1001 and the car radio
listening frequency is out of sync and you wish to reset them, do the following:
1.
Tune the car radio to 87.6MHz
2.
Press and hold
PREVIOUS
to return the FM transmitting frequency to 87.6 MHz.
